Vacuum Dryer
Feature：
- • Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
- • The heat source for evaporation may be low pressure steam or surplus heat steam.
- • The heat loss is less.
- • Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixed. It is in conformity with the requirement of GMP standard.
- • It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
Application:
-
It is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.
SPEC
|
Specification Item |
YZG-600 |
YZG-800 |
YZG-1000 |
YZG-1400 |
FZG-15 |
|
Inside Size Of Chamber (mm) |
Φ600×976 |
Φ800×1274 |
Φ1000×1572 |
Φ1400×2054 |
1500×1220×1400 |
|
Outside Size Of Chamber (mm) |
1153×810×1020 |
1700×1045×1335 |
1740×1226×1358 |
2386×1657×1800 |
2060×1513×1924 |
|
Layers Of Baking Shelf |
4 |
4 |
6 |
8 |
8 |
|
Interval Of Baking Shelf |
81 |
82 |
102 |
102 |
122 |
|
Size Of Baking Disk |
310×600×45 |
460×640×45 |
460×640×45 |
460×640×45 |
×460×640×45 |
|
Numbers Of Baking Disk |
4 |
8 |
12 |
32 |
32 |
|
Permitted Level Inside Chamber Without Load (Mpa) |
≤0.784 |
≤0.784 |
≤0.784 |
≤0.784 |
≤0.784 |
|
Temperature Inside Chamber (℃) |
-0.1 |
||||
|
When Vacuum is 30 torr And The Heating Temperature is 110 ℃, Vaporized Rate Of Water |
7.2 |
||||
|
Type And Power Of Vacuum Pump Without Condensate (kw) |
2X15A 2kw |
2X30A 23w |
2X30A 3kw |
2X70A 5.5kw |
2X70A 5.5kw |
|
Type And Power Of Vacuum Pump Without Condensate (kw) |
SZ-0.5 1.5kw |
SZ-1 2.2kw |
SZ-1 2.2kw |
SZ-2 4kw |
SZ-2 4kw |
|
Weight Of Drying Chamber (kg) |
250 |
600 |
800 |
1400 |
2100 |
Detail
 |
 |
 |
 |
 |
 |