Introduction of Hot Air Circulating Drying Oven Dryer

  1. Description of equipment:
 
Hot air circulation system adopts the fan circulation air supply mode, and the air circulation is uniform and efficient. The air source is driven by the circulating air supply motor (using a non-contact switch) to drive the wind wheel through the heater, and the hot air is sent out, and then through the air duct to the inner chamber of the oven, and then the used air is sucked into the air duct to become the air source for recirculation and heating. Ensure room temperature uniformity. When the temperature value oscillates due to the action of opening and closing the door, the air supply circulation system quickly resumes the operating state until the set temperature value is reached. CT-C (GMP) series oven is carefully designed by our factory on the basis of the original CT-C oven in accordance with the relevant requirements of GMP in the pharmaceutical industry. The product adopts low-noise, high-temperature-resistant, high-efficiency axial fan, equipped with automatic temperature control system, the whole box adopts a fully enclosed structure, and the hot air is circulated in the box, so as to reasonably discharge hot and humid air and add fresh air. The product has reached the leading level in China after several updates and upgrades, and the series of oven double door (front and rear door) type also has the function of interlocking before and after the door. It can also be equipped with humidity exhaust check valve, temperature recorder, working timing and other devices according to customer process requirements.
 
It is characterized by the fact that most of the hot air circulates in the box, which enhances the conduction and transfer of heat and improves the energy utilization rate. The oven is controlled by touch integrated controller, PID adjustment, and has high temperature control accuracy. The box is equipped with an adjustable air divider, and the temperature in the box is uniform. The low-noise energy-saving fan is used to balance the operation and greatly reduce the noise of the equipment. The air inlet is equipped with a medium (high) efficiency air filter. The air outlet is equipped with a low (medium) air filter. The inner wall of the box is full welding, arc transition, no dead angle, easy to clean. Fully meet GMP requirements.
 
 
 
 
  1. Scope of application:
 
The hot air circulating oven is suitable for heating, solidifying, drying and dehydrating materials in pharmaceutical, chemical, food, agricultural and sideline products, aquatic products, light industry and other industries. Such as raw materials, Chinese medicine pieces, extracts, powders, granules, dehydrated vegetables, etc.
It is widely used in precision baking, drying, tempering, preheating, shaping, processing, etc. of electronics, motors, communications, electroplating, plastics, hardware and chemicals, instruments, printing, pharmaceuticals, PC boards, powders, impregnation, spraying, glass, wood building materials, etc.; Internal heat circulation, baking objects are heated evenly.
 
  1. Functional characteristics:
 
- Most of the hot air circulates in the box, which has high thermal efficiency and saves energy. Commonly used heating heat source: steam, electricity, far infrared, electric steam dual-purpose with electric heating 15kw calculated according to type I, practical 5-8kw/h. The commonly used steam pressure is 0.02-0.8 Mpa (0.2-8 kgf/cm2).
 
- Using the effect of forced ventilation, the box is equipped with an adjustable air divider, the material is dried evenly, and the heat source can be steam, hot water, electricity, and far infrared, with a wide range of choices.
 
- It has a wide range of applications, can dry all kinds of materials, and is a general-purpose drying equipment.
 
- The noise of the whole machine is low and the operation is balanced. It is equipped with an automatic control system and a computer control system. The temperature is self-controlled, and it is easy to install and maintain. Operating temperature: steam heating: 50-140°C, up to 150°C. Electric and far-infrared heating temperature 50-350°C. If the operating temperature is greater than 140°C or less than 60°C, it should be indicated when ordering
 
- Fully enclosed structure, made of stainless steel, to meet the GMP requirements of the pharmaceutical and food industry.
 
- Easy to select, five standard models. They are single-door bicycles, two-door two-car, two-door four-car, three-door six-car, and four-door eight-car. Drying car, the size of the baking tray is uniform and can be interchanged; Drying car size: 950×710×1400mm, baking tray size: 460×640×45mm.
 

Post time: 2024-05-15 16:15:40