Industrial Continuous Vibrating Fluiding Bed Dryer

Short Description:

Industrial Continuous Vibrating fluiding bed dryer is made by vibrating motor to produce excitation force to make the machine vibrate, the material jumps forward under the action of this excitation force in the given direction, while the hot air is input at the bottom of the bed to make the material in fluidized state, the material particles are in full contact with the hot air and carry out intense heat and mass transfer process, at this time the highest thermal efficiency. The upper cavity is in the state of micro-negative pressure, the wet air is led out by the induced fan, and the dry material is discharged from the discharge port, so as to achieve the ideal drying effect. 


Product Detail

Product Tags

  1. Introduction:


    • The industrial continuous vibrating fluiding bed dryer  is a new type of fluidized and efficient drying equipment suitable for the drying of granular and powdery materials. It has the advantages of easy operation, energy saving and environmental protection. Industrial continuous vibrating fluiding bed dryer is a new type of equipment that has been gradually developed and expanded in the past ten years, and is increasingly becoming the main model in drying equipment. Vibrating fluiding bed is a new type of drying device that applies a vibration source with specific requirements to the ordinary fluiding bed dryer.
    • This vibration source can be divided into electric motor method, electromagnetic induction method, crankshaft or eccentric wheel method, pneumatic or hydraulic method according to its excitation method.

    Feature:


    • •Industrial Continuous Vibrating source is driven by vibrating motor, with smooth operation, easy maintenance, low noise, long service life and convenient maintenance.

    • •High thermal efficiency, can save more than 30% energy than general drying device. Uniform bed temperature distribution, no local overheating.

    • • Good adjustability and wide adaptability. The thickness of the material layer and the speed of moving as well as the change of the whole amplitude can be adjusted.

    • • It can be used for drying fragile material because of the small damage to the material surface.

    • • The fully enclosed structure effectively prrotects the clean working environment.

    • • The mechanical efficiency and thermal efficiency are high, and the energy saving effect is good, which can save 30-60% energy than the general drying device.
    •  

    Application:


    • • The industrial continuous vibrating fluiding bed dryer is widely used for drying, cooling, humidifying and other operations of powder granular materials in chemical, light industry, medicine, food, plastic, grain and oil, slag, salt making, sugar and other industries.
    • • Medicine and chemical industry: various pressed granules, boric acid, benzene diol, malic acid, maleic acid,pesticide WDG, etc.

    • • Food building materials: chicken essence,lees, monosodium glutamate, sugar, table salt, slag, bean paste, seeds.

    • • It can also be used for the cooling and humidification of materials, etc.

     

    Specification:


    Model

    Area Of Fluidized-Bed (M3)

    Temperature Of Inlet Air (℃)

    Temperature Of Outlet Air (℃)

    Capacity Of Vapor Moisture (kg/h)

    Vibration Motor

    Model

    Powder (kw)

    ZLG-3×0.30

    0.9

     

     

     

     

     

     

    70-140

     

     

     

     

     

     

    70-140

    20-35

    ZDS31-6

    0.8×2

    ZLG-4.5×0.30

    1.35

    35-50

    ZDS31-6

    0.8×2

    ZLG-4.5×0.45

    2.025

    50-70

    ZDS32-6

    1.1×2

    ZLG-4.5×0.60

    2.7

    70-90

    ZDS32-6

    1.1×2

    ZLG-6×0.45

    2.7

    80-100

    ZDS41-6

    1.5×2

    ZLG-6×0.60

    3.6

    100-130

    ZDS41-6

    1.5×2

    ZLG-6×0.75

    4.5

    120-170

    ZDS42-6

    2.2×2

    ZLG-6×0.9

    5.4

    140-170

    ZDS42-6

    2.2×2

    ZLG-7.5×0.6

    4.5

    130-150

    ZDS42-6

    2.2×2

    ZLG-7.5×0.75

    5.625

    150-180

    ZDS51-6

    3.0×2

    ZLG-7.5×0.9

    6.75

    160-210

    ZDS51-6

    3.0×2

    ZLG-7.5×1.2

    9.0

    200-260

    ZDS51-6

    3.7×2

     

    Detail: